目前，濟南輕型鋼結構在住宅建筑中的應用越來越廣泛，對提升住宅結構輕度、耐久性等方面起到重要作用。下面就來講講相關事項吧。

At present, Jinan light steel structure is more and more widely used in residential buildings, which plays an important role in improving the lightness and durability of residential structures. Let's talk about relevant matters.

住宅建筑中輕型鋼結構設計思路的運用：為使輕型鋼結構更加安全、可靠，在設，須保證輕型鋼結構具有足夠的剛度和強度，同時，要與建筑物的使用要求相符，且具備一定的耐久性。在結構方案的編制上，要本著節省材料的原則，并在不影響結構安全性的前提下，減輕型鋼結構的重量。

Application of light steel structure design ideas in residential buildings: in order to make the light steel structure more safe and reliable, it is necessary to ensure that the light steel structure has sufficient rigidity and strength during design, and at the same time, it should be consistent with the use requirements of the building and have certain durability. In the preparation of the structural scheme, the principle of saving materials shall be followed, and the weight of the section steel structure shall be reduced without affecting the structural safety.

多層輕型鋼結構安裝前的施工準備：在進行輕型鋼結構施工之前，應重新檢查需要使用的鋼構件，包括構件檢驗證書、材料質量證書、鋼材料材質檢驗證書等。在進行現場檢查工作時，應以構件放樣圖和設計圖紙為依據，確定每個鋼構件的安裝位置和編號，并將其按照類型進行合理堆放，以便安裝工作的順利實施。

Construction preparation before installation of multi-storey light steel structure: before the construction of light steel structure, the steel components to be used shall be re inspected, including component inspection certificate, material quality certificate, steel material inspection certificate, etc. During the on-site inspection, the installation position and number of each steel member shall be determined based on the component setting out drawing and design drawing, and shall be stacked reasonably according to the type so as to facilitate the smooth implementation of the installation work.

此外，須要檢査附件的規格和數量、節點摩擦面、焊縫坡口質量、螺栓孔位置和直徑、連接板零件角度和位置、鋼構件幾何尺寸等，這樣能夠有效降低高空作業中尺寸修改的次數。

In addition, it is necessary to check the specification and quantity of accessories, node friction surface, weld groove quality, bolt hole position and diameter, angle and position of connecting plate parts, geometric size of steel members, etc., so as to effectively reduce the number of size modifications in high-altitude operations.

為了有效控制輕型鋼結構施工的質量，首先應利用噴砂方法加工構件的摩擦面，并抽取試件，將其應用在抗滑移系數試驗中。

In order to effectively control the construction quality of light steel structures, first of all, the friction surface of components should be processed by sand blasting, and the test pieces should be extracted and applied to the anti slip coefficient test.

其次在螺栓進場的過程中，應對相關材質規格型號設計以及出廠合格證的情況進行檢查，并保證螺栓連接比例的合理性，有序進行預拉力試驗。值得注意的是，在安裝之前應復査現場柱基，檢査預埋螺栓標高基準面、柱中線定位軸線，確保其能夠符合規定的標準。

Secondly, in the process of bolt mobilization, relevant material specifications and model designs and factory certificates should be checked, and the rationality of bolt connection proportion should be ensured, and the pretension test should be carried out in an orderly manner. It is worth noting that the on-site column foundation shall be rechecked before installation, and the embedded bolt elevation datum and the column centerline positioning axis shall be checked to ensure that they can meet the specified standards.

在施工前做好安全技術交底，分派安全管理人員對施工現場的施工人員、機械設備進行管理：作業之前，認真檢査施工工具、機具、設備是否完備，尤其對于安全裝置要加大檢查力度，查看其是否正常運作。

Before construction, make safety technical disclosure and assign safety management personnel to manage the construction personnel and mechanical equipment on the construction site: before operation, carefully check whether the construction tools, machines and equipment are complete, especially the safety devices, to see if they are in normal operation.

在高空作業時，禁止隨意擺放材料、工具，須將其放置在安全地方：派專人現場指揮起吊，保證鋼構件提升或下降的平穩性，嚴禁操作人員出現緊急制動操作，加強機電設備的防雨措施，不得準許非人員操作機電設備。

When working at height, it is forbidden to place materials and tools at will, and they must be placed in a safe place: special personnel shall be assigned to command the lifting on site to ensure the stability of lifting or lowering of steel members, emergency braking operation by operators is strictly prohibited, rain proof measures for electromechanical equipment shall be strengthened, and non professional personnel shall not be allowed to operate electromechanical equipment.

住宅建筑中輕型鋼結構的運用相關內容就講解到這里了，您對此有什么疑問可以來我們網站http://m.nbsdzs.com咨詢了解！

This is all about the application of light steel structure in residential buildings. If you have any questions, please come to our website http://m.nbsdzs.com Consult and understand!